how to enable the
CAN
BE MONITORED function.
Page 12
In standby status ,short- press button to enter system setting menu.
9.
System setting
No.
Setting items
Options
Note s
1
2
CHIME VOLUME
Default 03, 01 - 07 adjustable.
3
RING TYPE
Door1 ring type
01 by default, 00-11 optionals
Door2 ring type
02 by default , 00-11 optionals
Intercom ring type
03 by default , 00-11 optionals
4
DO NOT DISTURB
Off by default, at the ringing, intercom between monitors,
broadcast status, the LED indicator will flicker when turn
on “DO NOT DISTURB” function.
5
CAN BE
MONITORED
Off by default, it can be monitored by other indoor
intercoms in the system when turn on this function.
6
DEVICE ADDRESS
Room1/2/3/4
Master monitor must be set as ROOM
1, and the option will be yellow if two
monitors set the same address.
7
8
RESTORE
DEFAULT
Restore the system to default settings.
CHIME TIME
Default 30seconds , (10 - 60 seconds adjustable)
RING
REPEAT
Default ENABLE. If disable it, the monitor will only
ring once when be called.