8. Operation guide
DEVICE ADDRESS set
ROOM NO. set
Press to go to system settings, press or to go to DEVICE
ADDRESS. Press to select the item, press or to set the
master monitor to be ROOM 1. For slave monitors, please set the address
to be ROOM 2/3/4.
This item will only appear when the monitor is installed in the apartment
system. Long press on door station, then input password(default
000000) to enter system settings, press to go to DEBUG, press any
number button to enter debug setting, press any number button to enable
DEBUG MODE
.
Long
presss
until
the
screen
shows
SYSTEM
SETUP.
Then go to the monitor system settings, press or to go to
ROOM NO. setting, press to enter it to change the ROOM NO.
Remark
:
The
ROOM NO. could only be modified when the door station
screen shows SYSTEM SETUP.
#
#
#
Talking volume adjust
At the state of monitoring/ringing/talking/making intercom/broadcasting,
press or to enter volume adjustment interface. press or
again to adjust the talking volume,
Brightness/color/contrast/display model adjust
At the state of monitoring/ringing/talking/making intercom/broadcasting,
Page 9
