What’s included in the cartons:
1 – LaserKnife 2525 Engraving/Cutting Machine
1 – Metal honeycomb platen
1 – Air pump
1 – Exhaust fan
1 – Corrugated plastic exhaust duct, 100 mm dia. with clamp
1 – Water pump
1 – USB Key
1 – Lens focus gauge
1 – Power cord
1 – Ground wire
3 – Spare Fuses
1 – USB cable
8 – Magnets
5 – Pieces of 6” x 9” chipboard
1 – Piece of scribed siding with 1/16 spacing, 10” long
2 – Piece of scribed siding with 3/32 spacing, 10” long
1 – Piece of 10” x 10” x 1/16” acrylic
1 – Owners manual
What’s included on the Micro-Mark web site:
1 – CorelLASER software
1 – Set of sample part drawings
What you’ll need to provide:
1 – Computer running Windows 2000 or later
1 – CorelDRAW software version 11 or later
1 – 5 gallon plastic bucket containing 3 gallons of
distilled water
Your own drawing files, created in, or importable into,
CorelDRAW versions 11 or later
1 – 220vAC power: either at a wall outlet with two-prong
Europe standard socket or adapter to same.
We alternately suggest a transformer to change
110vAC wall power to 220vAC power needed to run
the machine, like Micro-Mark #86127 (sold separately).
MM031615
TM
OWNERS MANUAL & INSTRUCTIONS FOR USE
