09
Connect the cable from the instrument housing to the port at the back
of the control panel.
If the charging is required, insert the charging pin at the back of the
control panel and connect the power cord. Battery indicator will
show the charging.
Now E-burette is now ready to be switched on.
Switch on the instrument using the ON/OFF switch at the back of the
control panel.
When it boots, the instrument will warn the user to switch the knob to
recirculation mode.
After turning the knob to recirculation mode, click the tick mark on the
control panel screen when ready.
Instrument will reset automatically, now it is ready to use.
OPERATING THE INSTRUMENT
