33
If an error occurs during measurement, the
measurement is interrupted and an error message
«Err» is displayed.
Please contact your local
Microlife service center if the error
persists.
If you think the results are
unusual, please read through
the information in this instruction
manual carefully.
Error
Description
Potential cause and remedy
Err 1
Signal too weak The pulse signals on the cuff
are too weak. Re-position
the cuff and repeat the
measurement.
Err 2
Error signal
During the measurement,
error signals were detected
by the cuff, caused for
instance by movement or
muscle tension. Repeat the
measurement, keeping your
arm still.
Error messages
F
F
