17
Taking blood pressure measurements (cont.)
Skipping the countdown time
The countdown time before measurement in
«SCREEN»
mode and «CENTRAL» mode
can be skipped by pressing
the Start/Stop button. While the Start/Stop button is pressed,
the next measurement begins immediately.
*
The device can be set into Standby mode by pressing the Start/
Stop button after the completion of measurements. The device
will automatically switch to Standby mode if left unattended for five
minutes.
Skip the countdown time and
begin measurement.
Standby mode
Setting measurement intervals in «CENTRAL»
mode
1) Press and hold the Start/Stop button for 3 seconds.
Press and hold for 3
seconds...
2) Press the <<M>> button to adjust the measurement
interval, then press the Start/Stop button to confirm.
15 30
60
45
The default measurement interval is 15 seconds. The interval can
be set as 15, 30, 45 or 60 seconds.
F
