WARNING:
The measurement results given by this device is not a diagnosis. It is not replacing the need for the
consultation of a physician, especially if not matching the patient’s symptoms. Do not rely on the measurement
result only, always consider other potentially occurring symptoms and the patient’s feedback. Calling a doctor or an
ambulance is advised if needed.
3.
How this Thermometer measures Temperature
This thermometer measures infrared energy radiated from the forehead as well as objects. This energy is collected
through the lens and converted to a temperature value.
4.
Control Displays and Symbols
All segments displayed
○
8
: Press the START/IO button
○
4 to turn on the unit; all segments will be shown for 1 second,
default body mode.
Ready for measuring
○
9 : after all segments have been show for 1 second, the unit is ready for measuring, the «°C» or
«°F» icon will keep flashing while the mode (3s body / 1s body / object), time and beep icon will be displayed.
Taking a measurement
: for 3s body mode ,when the device detect the distance is appropriate (within 5cm),the
screen shows “good”
○
10
with 1 short beep ,then press START/IO button
○
4 to start measuring. For 1s mode, when
the device detects the distance is appropriate (within 5cm), the screen shows “good”
○
10
with 1short beep, then
press START/IO button
○
4 to start the measurement.
Measurement complete
○
11
: The reading will be shown on the display
○
3
with the «°C» or «°F» icon and the mode
icon steady. The unit is ready for the next measurement as soon as the «°C» or «°F» icon is flashing again.
Low battery indicator
○
14 : When the unit is turned on, the «battery» icon will keep flashing to remind the user to
replace the batteries.
5.
Setting Date, Time, and Beeper Functions
Setting the date and time
○
25
After the new batteries are fitted, device will enter time setting automatically. Under any status, hold “MODE”
button for 8 seconds, will enter time setting mode.
Under time setting mode, first will be year setting, then Date
setting, following by time setting, (then jump back to year setting again as cycle, until “Start/IO” button be pressed
to enter stand-by mode”) with press MODE button.
1.
The year number flashes in the display (1 time/per sec) to indicate year setting
○
25 . Press “MEMO”
○
5
button to
®
