This thermometer can recall the last 30 readings with a record of both time and date.
•
Recall mode
○
16
:
Press the MEMO button
○
5 to enter recall mode when the power is off or in measuring mode.
The memory icon «
M
» will display.
•
Reading the last reading
○
17
:
Press and release the MEMO button
○
5
to recall the last reading. Number «1» and «
M
» are
displayed.
•
Pressing and releasing the MEMO button
○
5
after the last 30 readings have been recalled will resume the above sequence from
reading.
After memory recall
1.
Press “Start/ IO” button to go back to ready for measuring
2.
Press “Start/ IO ” button for 3 seconds to switch off.
3.
If no button be press for 30 seconds, the device will auto off.
10. Bluetooth
○
R
Function
This device can be used in conjunction with a smart phone running the
«Microlife Connected » App. The measurement results will be automatically transferred via Bluetooth®.
App Quick start guide
Please refer to APP quick start guide for more details
Downloading the «Microlife Connected » App
Download
«Microlife Connected » App for free from Google
Play™ (Android) or App Store (iOS) and install it on your smartphone.
Setup User Profile
1. Open the App and select “Start” to begin using the App.
2. Select “Settings” on the navigation menu (bottom) to enter “My profile”.
3. Edit profile information, then select “Save” to complete Profile setup.
Transfer Data
1. Turn on Bluetooth of Smartphone.
2. Open the app on the Smartphone, and select the Temperature Overview interface.
3. Make sure to FR1DQ1-B is within 5 meters of your Smartphone, and urn off other Bluetooth device if possible in case it
interfere the data transfer.
4. Turn on FR1DQ1-B in Body Temperature mode. Bluetooth of FR1DQ1-B is activated (when not taking measurement) and
automatically searches for Smartphone to connect to.
5. When FR1DQ1-B is connected to the App on a Smartphone, FR1DQ1-B will transfer data automatically if new data (hasn’t
been transferred previously) is available, while transferring. The LCD of FR1DQ1-B will show new data with “-” and 3 digits
thermometer designated ID for 3 seconds, no new measurement can be start within this 3 seconds.
6. Upon data transfer, the App will display a message with “-” and 3 digits thermometer ID (MAC address) to confirm which
Patient Log in the App the data should be assigned to. Be sure to check“-”and 3 digits thermometer ID is identical on
FR1DQ1-B and APP then select the Patient Log and Confirm to complete the data transfer.
If“
‐
”and 3 digits thermometer is not identical of both App and FR1DQ1-B, please discard the message show on the app to
stop the data transfer, and record the temperature data into the App manually. Or take a new measurement and start Transfer Data
from step 1 to 6 again.
