on the inside of the wrist.
b) The distance between the cuff and the
hand should be approx. 10 mm (1/2").
c) Secure the cuff with the Velcro fastener,
so that it lies comfortably and not too
tight. No space should remain between
the cuff and the wrist.
d
)
Lay your arm on a table, with the palm
upwards.
Support the arm a little with a cushion, so that the cuff rests at about the
same height as the heart. Remain still for 2 minutes, before beginning the
measurement.
5.4. Measuring procedure
After the cuff has been appropriately positioned, and you’ve selected User
1 or User 2, the measurement can begin:
a) If you want to take an Average Mode
measurement position the slide switch to
the 3. Remember, in this mode, the unit
takes 3 measurements (one after another)
and calculates the result. There is a 15
second rest time between measurements.
The unit beeps five seconds before each
upcoming measurement.
(Data obtained in Average Mode are indi-
cated by the MAM symbol.)
13
Summary of Contents for BP3BU1-4U
Page 1: ...CVSBU1 4 JUL06 FDA 1 ...
Page 3: ......
Page 27: ...Tensiómetro Reloj de Pulsera Manual de instrucciones 24 ...
