15
7. Software Functions
(For more detailed information, see instructions included on the CD)
Measurements stored in your wrist unit can be downloaded to your PC using the
enclosed software. Your PC will allow a capacity of monitoring 80 patients, each
with 1000 data (note: overuse will lower system efficiency). The memory data can be
transferred to the PC by connecting the monitor via the USB cable.
Important: your
wrist blood pressure monitor must be set to PC LINK mode whenever the
unit is in contact with your computer
. When the software prompts you to make
the connection to your blood pressure monitor, your monitor must be in the PC LINK
mode. Push the M Button and choose PC LINK then push the M Button again to
select it. You must set your wrist blood pressure monitor to PC LINK mode to install
the software and every time you want to download your measurements to your PC.
When the unit is in PC LINK mode you will see a series of curved lines that pulsate
from a stationary dot. Note: Software does not work with MAC computers!
7.1. Installation and Data Transmission
a) Insert CD into CD ROM drive of your PC. The installation will start automatically (If
not, click on SETUP.EXE). The software will prompt you to connect your unit to the
computer via the USB cable. The wrist unit must be in PC LINK mode.
b) To transmit data you must have stored data in the memory first. To download
memories from User 1, you must set the blood pressure monitor to User 1 prior to
downloading. To download memories from User 2, you must set the monitor to User
2. There is a User 0, which does not store memories. If your unit is on the User 0
setting, no readings will be downloaded. Remember to make sure your wrist unit is
in PC LINK mode prior to connecting to your computer.
c) You cannot take a blood pressure measurement while the unit is in PC LINK mode.
During the PC connection, the device is completely controlled by the computer. Please
refer to the ‘help’ file for software instructions.
Note: For problems with installation, go to Error Messages/Troubleshooting in
