Microlife BP RM 100, Instruction Manual, Page: 9 / 66

6
Risk Factor Input
Time
Confirm Risk
Factor
Start
0/I Button
Single/Average mode switch
Cuff Socket
AC/DC Power
Socket
3. COMPONENTS OF YOUR MONITOR
The illustration shows the device consisting of:
a) Main unit:
b) Upper arm cuff:
Medium cuff (M) for arm circumference 22-32 cm or
Large cuff (L) for arm circumference 32-42 cm
(Please note, the large cuff is available as an optional accessory)
4. USING YOUR BLOOD PRESSURE MONITOR
4.1. Inserting the batteries
The battery compartment is located on the back of
the device (see illustration).
a) Remove cover as illustrated
b) Insert the batteries (4 x size AA 1,5V), observing
the indicated polarity.
c) If a battery warning appears in the display, the
batteries are discharged and must be replaced.
Attention!
• After the battery warning appears, the device will not work until the
batteries have been replaced.
• Please use «AA» Long-Life or Alkaline 1.5V Batteries. The use of
rechargeable batteries (1.2V Accumulators) is not recommended.
• If your blood-pressure monitor is left unused for long periods, please
remove the batteries from the device.