© Microhard Systems Inc.
14
Drawing 3-4: Nano n2420 OEM Mechanical
3.0 Hardware Description
3.1.1 Nano OEM Mechanical Drawing
The Nano Series OEM Modules have an extremely small form factor as see in
Drawing 3-3
and
Drawing 3-4
below.
3.1.2 Nano OEM Connectors
Antenna
All Nano OEM Modules use an MMCX connector for the antenna connection.
Data
The Data connector uses a AVX-Kyocera 5046 Series 60 pin board to board connector. The
manufacturers part numbers are listed below, or the mating connector is available directly from
Microhard Systems.
AVX-Kyocera Part Number: 24-5046-060-600-829+
Microhard Systems Inc Part Number: MHS030510
(Strips of 100)
The above part numbers are for the mating connector required to interface to the Nano Series
Modems. (The mating connector is the same for both the n920 and the n2420)
To assist in the layout or circuits required to interface with the Nano Series Modems, see
Appendix E
. Also
an Orcad Library file is available from Microhard Systems.
Drawing 3-3: Nano n920 OEM Mechanical
Units: millimeters
Leg Detail
