© Microhard Systems Inc.
86
Appendix B: Settings (S) Register Quick Reference
S118
Roaming
65535-roaming enabled
1-254-fixed upstream unit
*1
S119
Quick Enter to Command Mode
0-*disabled
1-enabled
S123
RSSI Value (dBm, read only)
S133
Network Type
0-Point-to-Multipoint (PMP)
1-Point-to-Point (PP)
2-Peer-to-Peer (P2P)
S140
Destination Address
1-65535
S141
Repeater Existence
0-*no repeater
1-1 or more repeaters exist
S142
Serial Channel Mode
0-*RS-232 interface
1-half-duplex RS-485
2-full-duplex RS-485
S143
Sleep Mode
0-*active (no sleep)
1-sleep mode 1, stays awake on local and air data
2-sleep mode 2, stays awake only on local data
3-sniff mode 1, stays awake on local and air data
4-sniff mode 2, stays awake only on local data
5-sniff mode 3, same as sniff mode 1 but will discard data if
cannot find upstream unit
S144
Sleep Duration (seconds)
0-65535
*60
S145
Awake Timeout (seconds)
0-65535
*10
S149
LED Brightness (%)
0-100
*100
S150
Quick Sync Mode
0-*normal sync
1-quick sync mode, wait for acknowledgement
2-quick sync mode, wait for timeout
S151
Quick Sync Timeout (ms)
100-65534
*200
S153
Address Tag
0-*disable
1-enable
S158
FEC Mode
0 *No FEC
1
Hamming (7,4)
2
Hamming (15,11)
3
Hamming (31,24)
5
Binary BCH (47,36)
6
Golay (23,12,7)
7
Reed-Solomon (15,11)
S217
Protocol Type
0-*transparent
1-MODBUS RTU
2-DF1 protocol, address filtering
S237
Sniff Duration (hops)
1-255
*10
S244
Channel Request Mode
0-*channel request
1-TDMA mode
S251
Master Hop Allocation Timeout (hops)
1-254
*10
