micro
HAM ©
2016
All rights reserved
HELP MENU
Manuals:
Link to microHAM manuals located on your system.
Setup Guides:
Link to software configuration guides for many common applications. Documents must be
installed from installation CD-ROM or downloaded by invoking Download Documents menu item.
Cable Schematics:
Link to cable diagrams. Documents must be installed from installation CD-ROM or
downloaded by invoking Download Documents menu item.
Download Documents:
Downloads microHAM documentation including updated manuals and setup guides.
You may specify the products for which you want documentation.
NOTE:
Requires an internet connections.
microHAM Home Page:
microHAM Downloads Page:
www.microham.com/contents/en-us/d29.html
Show Tooltips:
When checked, small, single line help is displayed below the mouse cursor.
Update Router:
Download and install the most recent version of Router.
IMPORTANT:
Whenever it is possible, always perform Router upgrade here!
About:
Shows the Router's internal version number.
DEVICE CONFIGURATION TABS
There are six (6) tabs for configuring Station Master. Each tab controls part of Station Master's functions.
Except for Antenna Switching & PTT Sequencer and Rotator, any change is applied immediately.
●
Ports:
assign virtual ports to the Station Master for use by applications
●
Antenna Switching & PTT Sequencer:
contains six sub-tabs for configuring antenna selections,
antenna definitions, rotor, and sequencer operation.
●
Rotator:
configures internal Rotator controller parameters
●
Keyboard:
configures operation of PS/2 keyboard or keypad
●
Display:
configures operation of the LCD display.
●
System Settings:
configures power control and displays system power
19
