manualshive.com logo in svg

Microh LED Quadpar TRI MKII, User Manual

Share
Download
Microh LED Quadpar TRI MKII User Manual Download Page 6

5 

 

4. MOUNTING AND INSTALLATION   

 

Caution:

 For added protection, mount the fixtures in areas outside walking paths, seating areas, or in areas were the fixture might 

be reached by unauthorized personnel. Before mounting the fixture to any surface, make sure that the installation area can hold a 
minimum point load of 10 times the device’s weight. Fixture installation must always be secured with a secondary safety attachment, 
such as an appropriate safety cable. Never stand directly below the device when mounting, removing, or servicing the fixture. 

Whether installing inverted on a truss or ceiling, or set on a flat level surface (see image below). Be sure this fixture is kept at least 
0.5m (1.5 ft) away from any flammable materials (decoration etc.). Always use and install the supplied safety cable as a safety 
measure to prevent accidental damage and/or injury in the event the clamp fails. 

Mounting Points:

 Overhead mounting requires extensive experience, including calculating working load limits. A knowledge of the 

installation material being used, and periodic safety inspection of all installation material and the fixture are all imperative and should 
only be performed by a qualified technician. Improper installation can result in bodily injury and damage. 

The MICROH LED QUADPAR SERIES can be mounted by using the pole mount on the base of the T bar. Be sure to complete all 
rigging and installation procedures before connecting the main power cord to the appropriate wall outlet. 

The MICROH LED QUADPAR SERIES has a folding bar mechanism that is easily released by gently pressing upward on the silver 
clip in the middle base of the bar. Please see diagrams below.  

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for LED Quadpar TRI MKII


















Reviews:

No comments

Brands by name

Popular brands

Load more brands