Microh LED Quadpar TRI MKII, User Manual

Page: 4 / 17

3
- Any non-manufacturer additions, modifications or changes in any way will void all warranty.
- Please do not attempt to open unit. It is only to be serviced by an authorized technician. If this occurs, or is apparent, the warranty
will be voided.
- The fixture’s warranty will be voided if there are any malfunctions from not following the user manual or any illegal operation (shock
short circuit, electronic shock, lamp broke, etc.)
-This fixture is equipped with 9 operating modes.
4 Pedal Foot Switch, Manual Colour Dimming, Built-in Program, Auto, Sound
Active, Master/Slave, DMX & IR Remote.
Press MODE and SET UP button simultaneously to run the auto-run program mode. To make the display stay on continuously,
press the MODE and UP buttons simultaneously. To make the display turn off after 20 seconds, press the MODE and DOWN
buttons simultaneously.
4-PEDAL FOOT SWITCH MODE
- In any mode, you will enter the foot pedal controller function when you set foot on any of the foot pedals. The functions for the
pedal are:
- 1.BLACK OUT is to turn off the light;
- 2.FREEZE is to lock the current condition;
- 3.SOUND ACTIVE is for sound active function;
- 4.PRESET is to select the built in programs and the static colours. The designed order is: program1 (static colour) → program2 →
program3 → program4 → program5 → program6 → program7 → program8 → program9 → program10 → program11 → program12
→ auto run → red → green → blue → yellow → purple → cyan → white
Note: 1. Keep pressing the PRESET foot pedal, the fixture will run the program in the designed order by cycle.
2. When press the FREEZE foot pedal, the fixture will lock the current condition. Press the FREEZE foot pedal again, and
the fixture will continue running the previous program you have select.
3. When the fixture is in the foot pedal controller function, the LED digital display will show the current running program.
MANUAL COLOUR DIMMING MODE
- Press MODE button, press SETUP to choose colour and flash speed, red
“
r.
×××”
,green
“
G.
×××”
, blue
“
b.
×××
- Press SETUP to choose different colour, Press UP or DOWN button to set the dimming rate (0-255).
- When “FS.XX” is displayed, press UP or DOWN to select flash speed 0-99, 0 is turn off flash,1 is the slowest,99 is the fastest.
BUILT-IN PROGRAM MODE
- Press MODE button to select built-in program mode, “Pr.XX” is displayed. Press SETUP button choose the program, the colour
jumping speed and flash speed, when “Pr.XX” is displayed, press UP or DOWN button to set the program 1-12, total 12 programs.
- When “SP.XX” is displayed, press UP or DOWN to set the jumping speed (1-99), when “FS.XX” is displayed, press UP or DOWN
to set the flash speed (0-99), “0”is turn off flash.
- Notice: “ Pr.01” is static colour select program. There are 8 colours to choose from. Press the SET UP button to enter the static
colour submenu. When “CL.-X” is displayed press UP or DOWN buttons to scroll through the static colours.
AUTO MODE
- Press MODE button, when ”AUTO.” is displayed, the built-in programs run one after another in a continuous loop.
- When “SP.XX” is displayed, press UP or DOWN to set the colour jumping speed (0-99), ”0”is turn off flash.
- When ”FS.XX” is displayed, press UP or DOWN button to adjust the strobe speed(0-99), ”0”is turn off flash.