Microgate WITTI-TAB, User Manual

Page: 31 / 33

Microgate Witty TAB User Manual Page 31 of 33
2.20 P99 – P
ARAMETER
C
ONFIGURATION
The program P99 allows setting three different parameter types, i.e. the radio channel, the
brightness, and internal time/date.
Changing the Radio Channel (display board and photocells are set on CH.1 by default) may be
necessary to prevent frequency collisions with other Kit Witty·TAB on the field.
Put the n photocells that must be set into " configuration mode ": turn off the photocells and then
press and hold the on/off button for 5 seconds (see chap. 1.3.2). When all photocells have a red
blinking light, continue with the channel configuration on the Witty·TAB. Confirming the channel
number with the yellow L
AP
-R
ESET
button, it is transmitted to all listening photocells emitting a
dual tone beep, restarting them and turning them on in normal mode. Use the P98 program (chap.
2.19) to ensure that the channel has been set correctly.
CH _
Insert the radio channel number (1-8) assigned to the display board and to all
photocells which are in “ configuration mode ” in that moment
L _
It is possible to choose between Automatic (“A”) brightness or set to a fixed value
of 0-100 (with steps of 5), where 100 is the maximum brightness and 0 the
minimum. (see also chap. 1.6)
d:t:__
Choose the date/time forma t, either “EU” (= DD.MM.YY; HH:MM:SS 24h) or “US”
(MM.DD.YY HH:MM:SS AM/PM)
12:__
(Only for the US format) Select if the inserted time is AM/PM
Date
Insert Day, Month, Year (or Month, Day, Year for the US format)
Time
Insert Hours, Minutes and Seconds of the current time (for the EU use the 24h
format)
rt:_
Enable the Lynx ReacTime:
OFF.. ReacTime function disabled
On…. ReacTime function enabled
Please note, that the external reset is being disabled while this function is active
(see below).
(The Lynx ReacTime device must be programmed with the special firmware
1.51b05 and Witty·TAB is supporting this function starting from firmware version
1.00.05;
Configuration ReacTime: Menu Training 12V Mode Pulse)