Microgate WITTI-TAB, User Manual

Page: 10 / 33

Microgate Witty TAB User Manual Page 10 of 33
Extend the tripod legs to the required height (usually the photocell must be interrupted by the chest of an
athlete), and position the photocells and the reflectors at a distance of 1-7 meters.
1.3.2 S
TATUSES AND
C
OLORS OF THE
P
HOTOCELL
LED
PHOTOCELL OFF
STATUS STATUS LED
•
Battery charged/empty
Off
•
External supply
•
Battery charging
Orange blinking light
•
External supply
•
Battery charging
completed
Green steady light
PHOTOCELL ON
STATUS STATUS LED
NORMAL Mode
•
Battery charged
•
Battery empty
Green - Pause
Red - Pause
BOOTLOADER Mode
•
The photocell has not been switched on pressing the
ON/OFF button but connecting the USB cable to a PC. This
activates the BootLoader HID and the firmware can be
updated.
Red - Green
CONFIGURATION Mode
•
When switching on, the ON/OFF button is pressed for at
least 5 seconds and the configuration mode is activated.
Red blinking light
TWO PHOTOCELLS Mode:
Master photocell (higher serial number)
•
Battery charged
•
Battery empty
Slave photocell (lower serial number)
•
Battery charged
•
Battery empty
Green - Pause
Red - pause
Green fast blinking light
Red fast blinking light