HiLink User manual EN
–
v 1.0.1
8
2.1.1
Header bar
The following are displayed:
•
the time of day
o
Red if not synchronized
o
White if the system has been synchronized
•
the Bluetooth symbol
o
Only present when connected to another device
•
the satellite symbol
o
White if not used
o
Red if enabled and a valid signal for synchronization has not yet been received
o
Green if enabled and a valid synchronization signal has been received
•
the battery symbol with the marks for the current charge
2.1.2
Area of the currently selected settings
•
GID (Group ID): represents a value that allows radio pulses to be received only from systems
that have set the same Group ID. Equivalent to the old radio channel concept of the old
LinkGate EncRadio systems
•
FREQ: The frequency number set in transmission and reception (see table in appendix for
matching frequencies and settings of old Linkgate EncRadio/DecRadio systems)
•
The type of pulse being transmitted (START-STOP- LAP1...LAP14)
You can change this information in the various menus in the Settings
2.1.3
The bib number that will be transmitted
The number can be changed with the UP and DOWN arrows (press and hold to fast forward) or by touching
the tens or hundreds of units for a faster change.
