HiLink User manual EN
–
v 1.0.1
11
3.3
R
ADIO
In this section we can define the parameters of the radio transmission. In particular:
3.3.1
Radio Transmission
The set parameter can take the following values:
•
Long
: the transmission lasts approximately 2.6 seconds and has maximum redundancy
(important when the frequency is disturbed). This is the default value.
•
Short
: The transmission lasts approximately 0.7 seconds and has reduced redundancy. This
setting is preferred when I have to closely follow multiple radio transmissions that could have
the signals overlap.
3.3.2
Radio Frequency
This parameter represents the channel of the frequency used (see Appendix Radio Frequencies for matching
the actual frequencies in MHz).
3.3.3
Group ID
This corresponds to the channel of the old Linkgate transmission. The receiving stopwatch must have the same
number set in the “radio channel”. Group ID is generally a filter that selects
radio pulses that travel on the
same frequency but belong to the same Group ID. The HiLink system makes it much more convenient to
change frequency when there are several people transmitting on the same radio frequency
