Microframe Corporation Visual-Pager 3430, Manual, Page: 7 / 18

Series 3600
7
Microframe Corporation www.microframecorp.com 1.800.635.3811
Area Value Default Description
00 0000 Show pager # paged
00 0001-9999 1500 Show message of pager specified
01 00 Do not rotate the numbers
01 01-09 3 Rollover time (seconds)
02 00 Do not auto-delete
02 01-42 42 Auto-delete time (minutes)
03 00 Never chime
03 01-99 3 Chime duration (0.1 second interval)
04 00-99 9 Slow flash time (10 second interval)
00 disables
05 00-99 18 Fast flash time (10 second interval)
00 disables
99 98 Clear all numbers from display
99 99 N/A Reset display to factory defaults
Visual-Pager® Display Programming Instructions continued...
SETTING THE DISPLAY OPTIONS
All display options are over-the-air programmable. By sending a properly formatted message, display settings
may be changed. The command channel for programming options is pager 9999. The message format is
generally AA_VV, where A is the area and V is the value. The one exception is area 00, where the format is
AA_VVVV.
Special instructions for the B3611: Press the [*] key to get to the pager prompt. Press the [SETUP] key to insert
a space in a message.
DISPLAY BASE ID
The Model 3620 Visual-Pager® display comes set with a base ID of 500,000. You should only have to
change the base ID if you have changed the default on the transmitter. Please contact Microframe first before
changing the default.
TO SET A NEW DISPLAY BASE ID:
Plug in the display. On the transmitter, page pager # 1 with a Beep Type of 2 and a Message of 7337. The
display will auto learn the transmitter identity and save it. It will signify successful programming by showing
horizontal bars for about five seconds. You should not have to repeat this step unless your paging system
changes. Note: The display will accept this command only within the first 30 seconds after turn-on.