Microframe Corporation Visual-Pager 3430 Manual Download Page 2

 

 

Series 3600 

2

 

Microframe Corporation

 

www.microframecorp.com

 

1.800.635.3811 

 

 

 

 

 

 

 

 

 

 

Limited Warranty Agreement 

Your Microframe System is warranted against failure due to defects in workmanship or material for a period of one 
(1)  year  from  the  date  of  purchase.    Microframe  Corporation  will  repair  or  replace  any  defective  unit.  Obvious 
abuse or mishandling of the unit is NOT covered by this warranty. 
 

Merchandise Return 

If your Unit does not work satisfactorily, please give us a call. We may be able to clear up the problem by phone. 
If it becomes necessary to return your Unit to the factory, please observe the following: 
1. Place Unit in a sturdy box with sufficient packing material. 
2. If requested, include the AC power adapter. It is not necessary to return the cable and connectors unless they 
are the problem. 
3.  Return  the  system  insured  and  prepaid.  Microframe  is  not  responsible  for  shipping  damages  and  losses  on 
returned Units. 
 

Warranty Service 

For warranty service, please contact Microframe toll-free at 800-635-3811. One of our technicians will be glad to 
assist you. 
 

Assistance 

For any product assistance or maintenance help, contact Microframe by either calling 800-635-3811 or e-mailing 
us at[email protected]. 
 

Safety 

Do not install substitute parts or perform any modification to the product without first contacting Microframe.  
 

Disclaimer 

We constantly strive to improve our products. Specifications are subject to change without notice. 
 

Warning 

All  power  adapters,  line  cords,  and  electrical  equipment  should  be  kept  out  of  the  reach  of  children  and  away 
from water. (If you are installing cable in an air plenum area, such as a drop ceiling used for air return, you must 
use plenum-rated cable. The cable supplied from Microframe is rated CL2 and is approved for indoor installation 
everywhere except plenum areas.) 
 

Life Support Policy 

Microframe's products  are  not  authorized  for  use as  components  in  life support devices or  systems  without  the 
express written approval of the President of Microframe Corporation. As used herein: 
1.  Life  support  devices  or  systems  are  defined  as  systems  which  support  or  sustain  life,  and  whose  failure  to 
perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably 
expected to result in a significant injury to the user or any one depending on the system. 
2. A critical component is any component of a life support device or system whose failure to perform can be  
reasonably  expected    to  cause  the  failure  of  the  life  support  device  or  system,  or  to  affect  its  safety  or 
effectiveness. 
 

FCC Notice (for wireless products only) 

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to 
part  15  of  the  FCC  Rules.  These  limits  are  designed  to  provide  reasonable  protection  against  harmful 
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy 
and,  if  not  installed  and  used  in  accordance  with  the  instructions,  may  cause  harmful  interference  to  radio 
communications. However, there is no guarantee that interference will not occur in a particular installation. If this 
equipment does cause harmful interference to radio or television reception, which can be determined by turning 
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following 
measures: 
— Reorient or relocate the receiving antenna. 
— Increase the separation between the equipment and receiver. 
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 
— Consult the dealer or an experienced radio/TV technician for help. 

 

 
 
 
 
 

Summary of Contents for Visual-Pager 3430



















Reviews: