Microframe Corporation
10
604 South 12
th
Street
Broken Arrow, OK 74012
800-635-3811
www.microframecorp.com
Series 900
ENTERING OPTIONS MODE
To enter the Options Mode, do the following:
1) Turn on Keypad.
2) During the startup screen, press ‘0’.
3) “System Options” will display, signifying you are in options mode.
OPTIONS TABLE SUMMARY
General Options
Advanced Options
Rollover
#11
MastSlave
#21
AutoDel
#12
EntryAuto #22
KeyBeep #13
Sort List
#23
Chime
#14
Duplicates
#24
Fact Reset
#19
DeleteKey
#25
Address
#26
Keypad Type
#27
NAVIGATION
Type the two-digit number for the option you wish to set. The current value is shown. Type a new number to change the value.
Press [ENTER] to save or [DELETE] to cancel.
Option
Option Number
Value
Range
OPTIONS DEFINITIONS
#11 Rollover
0-9 Seconds; Default 3
Rollover is the length of time a number is shown on the Visual-Pager® display before advancing to the next number in
the list. A value of 0 means each number will be displayed until it is deleted.
#12 AutoDel
0-21 Minutes; Default 0
Autodelete is the time the keypad will hold a number before automatically deleting it. A value of 0 means autodelete is
disabled.
#13 KeyBeep
0-1 Off/On; Default 1
The audible feedback sound can be enabled or disabled.
#14 Chime
0.0-9.9 Seconds; Default 0.3
Sets the Visual-Pager® display chime duration. Not all displays follow this option.
#19 Factory Reset
0-1 No/Yes;
Resets all options to factory defaults.
#21 MastSlave
0-2 Auto/Master/Slave; Default 0
This controls the master/slave arbitration on a system. There should only be one master on a system.
Auto – Allows the keypads to negotiate which one is the master.
Master – The Keypad will always be a master.
Slave – The Keypad will always be a slave.
#22 Entry, Auto
0-4 None/Enter/Delete/Y/N; Default 3
This option determines number entry behavior. This can be used to set up dedicated quick-entry
keypads for enter and delete.
None – No response to numbers typed unless user first presses [ENTER] or [DELETE].
Enter,N – When user types a number, keypad assumes Enter Mode. When user has typed all 6
digits, waits for [ENTER] to be pushed before adding number.
Delete,N – When user types a number, keypad assumes Delete Mode. When user has typed all
6 digits, waits for [DELETE] key to be pushed before deleting number.
Enter,Y – When user types a number, keypad assumes Enter Mode. When user has typed all 6
digits, automatically adds number.
Delete,Y – When user types a number, keypad assumes Delete Mode. When user has typed all
6 digits, automatically deletes number.
Keypad Options