Microframe Corporation
10
604 South 12
th
Street
Broken Arrow, OK 74012
800-635-3811
www.microframecorp.com
Series 6500
Options Definitions continued…
Event Settings
On Zero
Determines what to do when the count down time / interval (2.1.2) reaches zero.
•
Chime
Chime at zero once or continuously.
•
Reload & Stop
Load the default countdown time
•
Reload & Continue
Load the default countdown time and continue counting down
•
Count Up
Start counting up from zero
•
Flash Zero
Flashes zero until a button is pressed
•
Start Next Timer
Start the next timer. Timer 1 starts Timer 2, Timer 2 starts Timer 1.
Chime Settings
Internal Chime Duration
Sets whether the internal chime sounds: none, once, or twice. The display comes standard with the internal chime.
External Chime Duration
Sets the duration of the external chime. This is actually an external "chime driver" circuit that may be purchased at the
time of order. For AC loads (such as a doorbell), the triac option is recommended. For DC loads, the relay option is
recommended.
Chime Time
The display can chime at six chime times when in clock mode. The display can chime at three chime times when in timer
mode. In addition, the display can chime on zero. Timer 1 uses Chime times 1-3 and Timer 2 uses Chime times 4-6.
Input Settings
Button Debounce
Ignores noise on Inputs 1 & 2. During a single press, buttons can "bounce" many times. This results in additional button
presses that the user did not intend. This option ignores the additional button bouncing.
Input Types
Defines the default state of the inputs: Normally Open or Normally Closed
•
Normally open.
Contact: doorbell
Voltage: 0V
•
Normally closed.
Contact: N.C. relay
Voltage: V.5