Microframe Corporation
Series 3007 - DataPage Lite Transmitter
8
2.1 SENDING A BASIC PAGE
In the most basic use of the transmitter,
simply type the pager number and then press
“SEND.” This will cause the pager with the
corresponding number to vibrate.
2.2 SENDING A GROUP PAGE
The pagers are capable of receiving both
indivual pages or a group page. To send a group
page, simply type the group call number instead
of the pager number in any of the paging steps
above. By default, the group call number is
"900," unless otherwise specified by the cus-
tomer.
2.3 PAGER TURN-OFF FROM BASE
Enter the pager number followed by the
"ENTER" key. Press "ENTER" again to bypass
"Beep Type" screen. When screen reads "Enter
Mesage," type the code "
((123456
" followed by
"SEND."
NOTE: The two left parenthesis
before the number are required, or it will
not work.
2.4 TURNING OFF ALL PAGERS
To simultaneously turn all pagers off at the
base, type in the group call number "900"
followed by "ENTER." Press "ENTER" again to
bypass "Beep Type" screen. When screen reads
"Enter Message," type the code "
((123456
" fol-
lowed by "SEND."
* Please see instructions in the back of this
manual for particular pager use.
2 OPERATION
