IM30-GLF
Doc. N° MO-0062-ING
Rev.
3
Date
14.02.2005
Copyright 2010 - Microener
Firmware:
2.0X
Pag
16
of
31
9. KEYBOARD AND DISPLAY OPERATION
All controls can be operated from relay's front or via serial communication bus.
The keyboard includes five hand operable buttons
(MODE) - (SELECT) - (+) - (-) - (ENTER/RESET)
plus one indirect operable key
(PROG)
(see synoptic table a fig.1):
a) - White key
MODE
: when operated it enters one of the following operation modes
indicated on the display :
MEASURES
= Reading of all the parameters measured and of those recorded
in the memory
SET DISP
= Reading of the settings and of the configuration of the output
relays as programmed.
PROG
= Access to the programming of the settings and of relay
configuration.
TEST PROG
= Access to the manual test routines.
b) - Green key
SELECT
: When operated it selects one of the menus available in the
actual operation MODE
c) - Red key
“
+
”
AND “
-
“
: When operated they allow to scroll the different information
available in the menu entered by the key SELECT
d) - Yellow key
ENTER/RESET
: It allows the validation of the programmed settings
- the actuation of test programs
- the forcing of the default display indication
- the reset of signal Leds.
e) - Indirect key
: Enables access to the programming.
ENTER/RESET
MODE
SELECT
+
-
PROG.
