Microcyber CS-TT106H-V2.0, User Manual

Page: 17 / 28

Temperature Transmitter | NCS TT106 | Page
Email | fang.siqi@microcyber.cn
http://www.microcyber-fieldbus.com
12
CU50 Cu50
CU100 Cu100
PT100 PT100
PT1000 PT1000
100MV mV voltage signal, range
：
-100 ~ 100 mV
B_TC B thermocouple
E_TC E thermocouple
J_TC J thermocouple
K_TC K thermocouple
N_TC N thermocouple
R_TC R thermocouple
S_TC S thermocouple
T_TC T thermocouple

Wiring system
：
It can be set to 2-wire system, 3-wire system
and 4-wire system, only effective for RTD.

Cold-end temperature compensation: it can be set to prohibit,
internal measurement and external measurement. When
the cold-end temperature compensation is prohibited, the
transmitter will not carry out the cold-end temperature
compensation;
when the cold-end temperature
compensation is enabled to measure internally, the value
of the cold-end temperature compensation is measured by
the internal temperature measuring chip; when the
cold-end temperature compensation is enabled to measure
externally, the external two-wire system Pt100 is used, and