MicroCool IBEX 1000, Installation & Maintenance Manual

Page: 24 / 41

IBEX 8 Nozzle
SMALL FRAME_June 2020
June 20 Page 24 of 41
OPTIONAL EXTRAS
ULTRAVIOLET FILTER (UV): High Intensity Light to kill bacteria and germs.
CAUTION: DO NOT DIRECTLY LOOK AT THE UV LIGHT AS EYE DAMAGE MAY OCCUR
The UV light filter is shipped with the UV bulb in a separate protective tube. The bulb is installed prior to starting the
pump unit.
Instructions to install (or remove) light bulb:
1. Using a screw driver gently pry open the locking pin and remove the bulb receptacle.
2. Do not touch the bulb with bare hands. Gently remove the bulb from the protective sleeve (the UV canister)
and insert it into the UV housing (spare sleeve).
3. Hold the green top part of the new bulb firmly, check pin orientation of the bulb and receptacle and gently
plug the new bulb into the receptacle, ensuring that it goes in all the way.
4. Replace the receptacle onto the UV housing and reinstall the locking pin.
5. The UV ballast is installed on the left under side of the pump housing. When the pump unit is running,
there is a red number indicated on the display. This number represents the decreasing life span of the light
bulb in days.
6. Once the number has reached 0 the ballast will emit an audible alarm, indicating that the UV bulb needs to
be replaced.
7. Once the bulb is replaced, press the reset button on the side of the ballast while the pump is running, and
the day countdown will resume at 365.
8. Proper disposal of all old bulbs is advised. Please contact your local municipality for disposal instruction.
Do not discard bulb with regular waste.
See UV Manual for more details and specifications.
Reset Button