1
2
Connect DC voltage 9V..36V to the
accordingly marked terminals of the
µMIC.200.
the LED “PWr” shows a permanent
green light. a green flashing light of
“LED1” indicates access to the internal
flash memory.
Plug network wire into LaN1 or
LaN2 connector and connect it to
your computer.
Follow the instructions for standard
configuration:
IP address LaN 1: 192.168.2.100
IP address LaN 2: is determined
via DHCP
You can log into the µMIC.200
through the SSH protocol.
Login data:
user: umic
Password: umic
Power supply
Network interface
