µMIC.200 QuICkStart
Control systems
Start-up in 6 steps.
Page 1: ...µMIC 200 QuickStart Control systems Start up in 6 steps ...
Page 2: ...ates access to the internal flash memory Plug network wire into LAN1 or LAN2 connector and connect it to your computer Follow the instructions for standard configuration IP address LAN 1 192 168 2 100 IP address LAN 2 is determined via DHCP You can log into the µMIC 200 through the SSH protocol Login data User umic Password umic Power supply Network interface ...
Page 3: ...ave already been created for you Set up a network connection between the µMIC 200 and your computer and start development The Blinky project realizes a running light on LED1 LED4 using the colours red and green 1 In view Project Explorer 1 double click the µMIC 200_blinky project 2 to open it 2 In view Make Target 3 you can now navigate to the directory project 4 and compile the project by double ...
Page 4: ... You can now log into the µMIC 200 Login data User umic Password umic Example for log in via serial interface cd Examples blinky project make sudo objs umic_blinky The blinky programme is compiled and started To execute the programme enter the password umic The LEDs of the µMIC 200 are now flashing red and green in turn Option for Linux users Junkersring 23 53844 Troisdorf Germany Tel 49 0 2241 25...
