Microcom 438TC, Operator'S Manual

Page: 45 / 242

Chapter 3 Getting Started
438TC Operator’s Manual - 880050-0100 3-29
3.11.1 Print Button
Operation Description
Printing a label
Press the Print Button while the printer is IDLE or PAUSED to
reprint the last label.
A power up label will print after a power ON cycle when the Print
Button is pressed.
Pause printing
Press & hold the Print Button while the printer is printing to enter
the PAUSED mode.
Press the Print Button again to continue printing.
Feeding labels
(Line feed)
Press & hold the Print Button while the printer is IDLE to advance
label media. The printer will continue advancing label media until
the Print Button is released.
Table 3-2 Print Button Description
3.11.2 Status Indicator Light
Light Color Description
Solid Green Indicates that the power is on and the printer is in a ready state.
Solid Red
Indicates an error has occurred. The printer will remain in this
state until the condition is removed. If an unexplained error
persists, contact your Service Representative.
Solid Amber
The printer is in the Tag/Tear or Peel-and-Dispense mode and is
waiting for the label/tag to be taken.
OR
Indicates that the printer is in the Boot Loader mode (MCB) and is
not running the printer application program.
Flashing Red
A cutter error has occurred.
OR
A memory download operation was not successful.
OR
Power Spike or low voltage on the AC line. (The printer will
remain in this mode until the condition is removed and the printer
power is cycled.)
Flashing Amber Printer is PAUSED,
Table 3-3 Status Indicator Light Description