Microchip Technology UCS81003, User Manual

Page: 24 / 52

UCS81003 Evaluation Board User’s Guide
DS50002300A-page 24

2014 Microchip Technology Inc.
4.1.1 Tips for Using the EVB GUI
• For many controls on the GUI panel, placing the mouse cursor over a control will
pop up context help that indicates the register address or provides a description.
• After a power up of the evaluation board, the default settings are loaded. Users
can save setting configurations to user-named files which can be reloaded at any
time for quick reconfiguration (see
Section 4.3.4.3 “Configuration Save and
Load”
).
• The GUI cannot be used to demonstrate UCS81003 behavior in Stand-Alone
mode since SMBus communication is required.
4.1.2 GUI Abbreviations
4.1.3 Keyboard Shortcuts
Some GUI controls have keyboard shortcuts, as shown in Table 4-1 .
Abbreviation Description
BC Battery charging
CDP Charging downstream port
DCE Dedicated charger emulation
DCP Dedicated charging port
EM Emulation
EM_EN Emulation enable
M1 Mode control pin number one
M2 Mode control pin number two
TABLE 4-1: UCS81003 EVALUATION BOARD GUI KEYBOARD SHORTCUTS
GUI Control Shortcut Control Description
Run CTRL + R
Section 4.2.1.1 “Stop and Run Buttons”
Stop F12
Section 4.2.1.1 “Stop and Run Buttons”