Microchip Technology SC70-6, User Manual

Page: 19 / 43

Installation and Operation
©
2009 Microchip Technology Inc. DS51874A-page 19
2.4.5.1 PICKIT SERIAL INTERFACE
Table 2-2 shows the pin number assignment for the different signals for each of the
supported interface protocols (SPI, I
2
C, etc.)
2.4.5.2 ICSP INTERFACE
The ICSP interface allows a PICmicro MCU device to be programmed with
programmers that support this interface, such as the PICkit 2 programmer (part number
PG164120). Table 2-3 shows the pin number assignment for the ICSP signals.
TABLE 2-2: PICKIT SERIAL HEADER SIGNALS
Pin
Number
PICkit Serial Header Signal
Comments
SPI I
2
C USART Microwire LIN
1 CS — TX CS TX
2 VDD VDD VDD VDD —
3 VSS VSS VSS VSS VSS
4 SDI SDA — SDI CS/WAKE
5 SCK SCL — SCK FAULT/TXE
6 SDO — RX SDO RX
TABLE 2-3: ICSP HEADER SIGNALS
Pin
Number
ICSP Signal Comments
1 VPP High Voltage Signal
2 VDD
3 VSS
4 DT ICSP™ Data
5 CLK ICSP™ Clock
6 —