Microchip Technology PRO MATE II, Manual

Page: 43 / 48


1999 Microchip Technology Inc. DS30243G1-page 39
PRO MATE
®
II DEVICE SUPPORT
Chapter 4. Programming Memory Devices
4.1 Introduction
This chapter deals exclusively with information about programming memory
devices.
4.2 Highlights
The topic covered in this chapter is:
• Programming Overview – Memory Devices
4.3 Programming Overview – Memory Devices
PRO MATE supports many of Microchip‘s Memory devices, specifically the
24 (I
2
C™) and 93 (Microwire
®
) series Serial EEPROMs.
The data displayed in the Program Memory window will be in by -16 for those
parts that support a by -16 mode, and by -8 for those devices that only
support by-8. The HEX file format is standard INHX8M format for either the
by -8 or by -16 devices.
Device selection is done via the Device Programmer dialog interface. Once a
device is selected, there may be additional selections for the
Smart Serial ™
devices. These additional options allow the user to select the High Endurance
Block, the Write Protect Starting Block, and the Number of Write Protect
Blocks.
All programming/verifying is done at 5 volts V
DD
, and the user can perform the
standard functions, Read, Blank Check, Programming, and Verification.
Figure 4.1: Device Programmer Dialog – 24AA00