PLECS MODEL
QUICK START GUIDE
FOR VIENNA PFC
2020 Microchip Technology Inc.
DS50002997A-page 4
Preface
INTRODUCTION
This chapter contains general information that will be useful to know before using the
PLECS Model Quick Start Guide for Vienna PFC . Items discussed in this chapter
include:
•
•
Conventions Used in this Guide
•
•
•
•
DOCUMENT LAYOUT
This document describes how to use the Vienna PFC PLECS as a development tool.
The manual layout is as follows:
•
•
Chapter 1. “PLECS Standalone Installation”
•
•
•
Chapter 4. “Starting a Simulation”
•
Chapter 5. “Model Configurations”
•
Chapter 6. “Modifying Control Parameters and Component Values”
•
Chapter 7. “Monitoring Signals”
•
Chapter 8. “Saving and Exporting Scope Traces”
•
NOTICE TO CUSTOMERS
All documentation becomes dated, and this manual is no exception. Microchip tools and
documentation are constantly evolving to meet customer needs, so some actual dialogs
and/or tool descriptions may differ from those in this document. Please refer to our website
(www.microchip.com) to obtain the latest documentation available.
Documents are identified with a “DS” number. This number is located on the bottom of each
page, in front of the page number. The numbering convention for the DS number is
“DSXXXXXXXXA”, where “XXXXXXXX” is the document number and “A” is the revision level
of the document.
For the most up-to-date information on development tools, see the MPLAB
®
IDE online help.
Select the Help menu, and then Topics to open a list of available online help files.
