2020 Microchip Technology Inc.
DS50002997A-page 33
PLECS MODEL
QUICK START GUIDE
FOR VIENNA PFC
Chapter 8. Saving and Exporting Scope Traces
Data plot in a Scope can be saved to a PLECS *.trace file by selecting File/Save trace
data. It can be loaded in subsequent simulation runs using File/Load trace data.
FIGURE 8-1:
Saving Scope Traces.
The plot data can be exported into a pdf, bitmap, or csv file for reports or further
analysis.
FIGURE 8-2:
Exporting Scope Traces.
PLECS can display multiple traces from different simulation runs within the same
session by using the Hold current trace button in the toolbar or by pressing the green
plus button in the Traces window.
