PLECS Model Quick Start Guide for Vienna PFC
DS50002997A-page 28
2020 Microchip Technology Inc.
7.3
MONITORING SIGNALS ON MULTIPLE PLOTS
Scopes can have multiple plots by adjusting the number of plots in the Scope
Parameters window. The scope will have a green terminal for each plot:
FIGURE 7-10:
Multiple Plot Selection.
FIGURE 7-11:
Multi-Plot Scope.
The example below monitors the switched-node voltage with respect to the mid-point
of the DC bus in the top plot. The bottom plot monitors the boost inductor current.
FIGURE 7-12:
Scope Monitoring Voltage and Current.
