Microchip Technology MCP2221 User Manual Download Page 9 | Manualshive

Page: 9 / 54

background image

Preface



2016 Microchip Technology Inc.

DS50002480A-page 9

RECOMMENDED READING

This user’s guide describes how to use the MCP2221 I

2

C Demonstration Board. Other

useful documents are listed below. The following Microchip documents are available
and recommended as a supplemental reference resource.

• MCP2221 Data Sheet

–

“USB 2.0 to I

2

C™/UART/Protocol Converter with GPIO”

(

DS20005292

)

• PAC1710/20 Data Sheet

–

“Single and Dual High-Side Current-Sense Monitor

with Power Calculation”

(DS20005386)

• MCP3221 Data Sheet

–

“Low-Power 12-Bit A/D Converter With I

2

C™ Interface”

(DS21732)

• MCP9808 Data Sheet

–

“±0.5°C Maximum Accuracy Digital Temperature Sensor”

(DS25095)

• PIC16(L)F1508/9 Data Sheet

–

“20-Pin Flash, 8-Bit Microcontrollers with XLP

Technology”

(DS40001609)

• MCP4706/4716/4726 Data Sheet

–

“8-/10-/12-Bit Voltage Output

Digital-to-Analog Converter with EEPROM and I

2

C™ Interface”

(DS22272)

• MCP23008/MCP23S08 Data Sheet

–

“8-Bit I/O Expander with Serial Interface”

(DS21919)

THE MICROCHIP WEB SITE

Microchip provides online support via our web site at

www.microchip.com

. This web site

is used as a means to make files and information easily available to customers. Accessible
by using your favorite Internet browser, the web site contains the following information:
•

Product Support

– Data sheets and errata, application notes and sample

programs, design resources, user’s guides and hardware support documents,
latest software releases and archived software

•

General Technical Support

– Frequently Asked Questions (FAQs), technical

support requests, online discussion groups, Microchip consultant program
member listing

•

Business of Microchip

– Product selector and ordering guides, latest Microchip

press releases, listing of seminars and events, listings of Microchip sales offices,
distributors and factory representatives

CUSTOMER SUPPORT

Users of Microchip products can receive assistance through several channels:
• Distributor or Representative
• Local Sales Office
• Field Application Engineer (FAE)
• Technical Support
Customers should contact their distributor, representative or field application engineer
(FAE) for support. Local sales offices are also available to help customers. A listing of
sales offices and locations is included in the back of this document.
Technical support is available through the web site at:

http://www.microchip.com/support

.

DOCUMENT REVISION HISTORY

Revision A (April 2016)

• Initial release of this document.

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

«
...
7
8
9
10
11
...
»

Summary of Contents for MCP2221























































Reviews:

No comments

Related manuals for MCP2221

Brand: IEI Technology Pages: 12

Brand: IEI Technology Pages: 190

Brand: IEI Technology Pages: 8

Brand: IEI Technology Pages: 193

Brand: IEI Technology Pages: 182

KINO-DBT Series

Brand: IEI Technology Pages: 133

Brand: Linear Pages: 10

Brand: Zetex Pages: 8

Brand: IEI Technology Pages: 131

VAR-SOM-MX8M-NANO

Brand: Variscite Pages: 2

Brand: Gigabyte Pages: 40

Brand: Gigabyte Pages: 96

Brand: IBASE Technology Pages: 62

Brand: Supermicro Pages: 124

FRDMDUALK3664EVB

Brand: NXP Semiconductors Pages: 17

Brand: CHAINTECH Pages: 49

Brand: Texas Instruments Pages: 7

Brand: ASROCK Pages: 38

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands