Testing Board Features
2016 Microchip Technology Inc.
DS50002480A-page 35
3.3.8.1
TAB OPERATION
Follow these steps to enable a notification:
1. Open the
RGB LED Notifications
tab.
2. The
Preview Color…
button brings up the Color window, allowing users to
choose colors.
FIGURE 3-12:
COLOR WINDOW
3. After selecting the desired colors, click the
OK
button and the system changes
the LED color accordingly.
4. To enable a specific notification, select the color you want in the “Blink” radio
button group corresponding to the notification. You can either:
- Select the default color (blue, red, green or white) available for each of the
four notifications;
or
- Set any color by selecting the “custom color...” radio button. In the Color
window (
Figure 3-12
), choose one of the basic colors or define a new color
and click
OK
.
5. Set the notification conditions, including the numeric value for comparison, if
applicable.
6. Click the corresponding “Enable” check box.
7. Optional. Users can also click the
Save Preferences into EERPROM
button to
save the current created configuration inside the 24LC128 EEPROM that’s on
the MCP2221 board (data is stored inside its last memory page, 255). Also, the
Load Preferences from EEPROM
button can be used to restore configurations
from the EEPROM.
Note:
Changing a numeric value used for the comparison will clear the “Enable”
check box.
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from