EVB-SEC1110/EVB-SEC1210/EVB-SEC1212-DEV
EVALUATION BOARD USER’S GUIDE
2013 Microchip Technology Inc.
DS00001574A-page 39
Chapter 6. SPI Programming Procedures
1. In order for the device to enumerate as "SMSC WINUSB", the Bond2 jumper
(J38) must be set to 1-2 during power-up.
2. Open SPI Flashwriter and confirm the device has enumerated.
3. Select the .bin file using
Browse
… button
4. Click
Program SPI2 Flash
5. After successful completion, the Status box will change to "Programming SPI2
flash completed successfully".
Note:
SPI Programming can only be performed on the EVB-SEC2112-DEV.
FIGURE 6-19:
SPI FLASH WRITER - SELECT DEVICE
