EVB-SEC1110/EVB-SEC1210/EVB-SEC1212-DEV
EVALUATION BOARD USER’S GUIDE
2013 Microchip Technology Inc.
DS00001574A-page 27
Chapter 3. CCID Firmware
3.8
FEATURES
• Supports smartcards of all voltages (1.8V, 3V and 5V)
• Supports T=0 and T=1 protocols
• Supports the fastest possible smartcards. (As per ISO Spec, ATR with TA1=17 is
the maximum speed possible for a smartcard. This is equivalent to 826Kbps.)
• Has a maximum CCID command length of 271 bytes
• Supports suspending the device in order to save power
• Remote wake-up is possible through smartcard insertion. When host is in sus-
pended state, on inserting a smartcard, the device will wake up the host.
• Support in-box drivers of all Windows and Linux versions
3.9
SINGLE SLOT CCID FIRMWARE
• USB CCID class compliant single slot firmware
• This firmware supports EVB-SEC1110, EVB-SEC1210 & EVB-SEC2112-DEV
boards
• Card can be removed / re-inserted. Interrupt notification will be sent to host
according to card changes in slot.
3.10 DUAL SLOT CCID FIRMWARE
• USB CCID class compliant dual slot firmware (enumerates as a composite USB
device)
• This firmware supports EVB-SEC1210 & EVB-SEC2112-DEV boards
• In slot1, card removed / re-insertion is supported
• In slot2, card removal / re-insertion is not supported as no status change interrupt
endpoint is supported for this interface
3.11 SMARTCARD READER DRIVER INSTALLATION UNDER WINDOWS
Most Windows OS installations include USBCCID drivers integrated by default. In
these cases, as soon as the EVB is connected to the system, the usbccid.sys driver is
loaded and the EVB-SEC1110/EVB-SEC1210/EVB-SEC1212-DEV smartcard reader
will be listed in the Device Manager as shown below.
