4.
Open the isUpdate tool. Select the port as USB HID, set the baud rate to 115200, and image num to 1 as
shown in the following figure.
5.
Click
Connect
.
Figure 5-6. Loading the Firmware Files
Note:
In isUpdate tool, image num value must be equal to the number of images to be programmed on the
device. For example, to program firmware (image1), DSP (image2), and configuration (image3), the image
num value must be selected as 3.
BM83 EVB
Firmware Update
©
2019 Microchip Technology Inc.
User Guide
DS50002902A-page 24