ADM00902
DEMONSTRATION BOARD
FOR EMC2103 USER’S GUIDE
2019 Microchip Technology Inc.
DS50002905A-page 5
Preface
INTRODUCTION
This chapter contains general information that will be useful to know before using the
ADM00902 Demonstration Board for EMC2103. Items discussed in this chapter
include:
•
•
Conventions Used in this Guide
•
•
•
•
•
DOCUMENT LAYOUT
This document describes how to use the ADM00902 Demonstration Board for
EMC2103 as a development tool to emulate and debug firmware on a target board. The
manual layout is as follows:
•
– Important information about the ADM00902
Demonstration Board for EMC2103.
•
Chapter 2. “Installation and Operation”
– Includes instructions on installing and
starting the Microchip Thermal Management Utility.
•
Chapter 3. “Microchip Thermal Management Utility”
– Includes instructions on
operating the Thermal Management Utility.
•
Chapter 4. “Hardware Description”
– Contains a detailed description of the
ADM00902 Demonstration Board for EMC2103.
•
Appendix A. “Schematic and Layouts”
– Shows the schematic and layout
diagrams for the ADM00902 Demonstration Board for EMC2103.
•
Appendix B. “Bill of Materials (BOM)”
– Lists the parts used to build the
ADM00902 Demonstration Board for EMC2103.
NOTICE TO CUSTOMERS
All documentation becomes dated, and this manual is no exception. Microchip tools and
documentation are constantly evolving to meet customer needs, so some actual dialogs
and/or tool descriptions may differ from those in this document. Please refer to our website
(
www.microchip.com
) to obtain the latest documentation available.
Documents are identified with a “DS” number. This number is located on the bottom of each
page, in front of the page number. The numbering convention for the DS number is
“DSXXXXXXXXA”, where “XXXXXXXX” is the document number and “A” is the revision level
of the document.
For the most up-to-date information on development tools, see the MPLAB
®
IDE online help.
Select the Help menu, and then Topics, to open a list of available online help files.
