ADM00902 Demonstration Board for EMC2103 User’s Guide
DS50002905A-page 36
2019 Microchip Technology Inc.
5. In the “Operating Mode” section, select from the drop-down menu, the LookUp
Table option.
6. From the taskbar, set the “Heat Source Power Dissipation” to 80%.
The fan speed will change to set to the defined RPM setting from the “LUT
Config” at each target temperature.
7. The plot from the Demo Data Acquisition chart should look like the picture below.
Notice the fan speed increasing when the 28°C, 35°C and 41°C LUT targets are
crossed.
