Microchip Technology AC320007, User Manual

Page: 7 / 18

Note: Usually only one display interface is implemented, either the LCD controller or the MCU bus interface. A FPC
or FFC connector with 50 pins and 0.5 mm pitch is used for the LCD connector.
4.3 Hardware Connection at J2
The FFC must be inserted with flex contacts facing down toward the PCB.
4.4 FPC or FFC Connector Pinout
Table 4-2. maXTouch Parallel LCD Connector
Pin Number Name RGB Interface Description MCU Description
1 ID Communication line to the ID chip on an extension board
2 GND Ground
3 D0 Data Line
4 D1 Data Line
5 D2 Data Line
6 D3 Data Line
7 GND Ground
8 D4 Data Line
9 D5 Data Line
10 D6 Data Line
11 D7 Data Line
12 GND Ground
13 D8 Data Line
14 D9 Data Line
15 D10 Data Line
16 D11 Data Line
17 GND Ground
18 D12 Data Line
19 D13 Data Line
20 D14 Data Line
21 D15 Data Line
22 GND Ground
23 D16 Data Line
24 D17 Data Line
25 D18 Data Line
26 D19 Data Line
27 GND Ground
28 D20 Data Line
Curiosity and Xplained Pro Boards
©
2020 Microchip Technology Inc.
DS70005414B-page 7