Device feed values:
60 seconds / 5 seconds = 12 requests
Total samples per 1 minute:
10 feeds x 12 requests = 120 data samples.
If the data buffer is set to low, for example 100, the first 20 data samples will then be lost.
The upload size, set to 100 in this example, will then upload the first 100 data samples and then the
remaining 20 data samples every 1 minute. The uploads take place consecutively until the data buffer
is empty.
5.
Device feed values:
Once you have added your list of device feed, proceed to the "Inputs" menu option.
Once the Web-Logger has determined the device feeds required it will commence with requesting the
data from the specific devices and will then upload the data to the Powermonitor website. The inputs
and their values from the device is then listed in the “Input” section of the Website, grouped by the
device feed type:
Once the device feed values are available on the Powermonitor website, the values can then be used
to construct “Feed” values that are used to display and graph the device feed values in customized
dashboards.
The construction of Feed values and dashboard are covered beyond the scope of this document and
is covered in detail in the Powermonitor Website manual.
