- 9 -
7.Attentions:
The power pin MUST be connected with a 12V DC stable power supply, and the
input current MUST be greater than 0.5A.
Please keep the radar surface dry and clean when using. To clean the radar surface,
wipe it with a soft wet cloth and let it dry in the air naturally.
Please pay attention to the shape of the radar during installation to ensure that the
installed radar is not deformed. Do not squeeze, knock, or beat the radar device in
any form.
Make sure that the radar is originally manufactured during installation and debug.
Do not try to disassemble or repair by yourself.
Any problems encountered in the using, please contact to the customer service of
Changsha MicroBrain Intelligent Technology Co., LTD.
8.Frequently asked question
1) The host computer cannot scan the radar WIFI hotspot after the radar is powered
on.
A: The WIFI hotspot is not list on the WIFI list of host computer. That’s because
the WIFI of the radar device has just been started and initialized. The WIFI
hotspot list on host computer has not been updated yet. User is suggested to
restart WIFI by turning off WIFI and check the WIFI list again..
2) The breathing or heartbeat measurement result is not stable.
1) A: In order to obtain more effective and stable breathing and heartbeat data,
