Microboards CopyWriter Live
12
Track Extraction
This menu option allows you to extract tracks from one master and burn them to a blank disc. To
use this feature, follow the directions below:
1.
Press
Yes/Setup
at the
Track Extraction
menu selection in the Setup menu to begin.
2.
The display will read
Extraction OK?
Press
Yes/Setup
, and the drives will eject. Place the
master disc in one drive and a blank in the other and close the drive trays. The master will
run through a track analysis. It does not matter in which drive the master is placed.
3.
After the master is analyzed, the display will read
EXTRACT THE TRK?
, followed by
TRACK 01/XX
, where
XX
is the number of tracks on the master. Press
Yes/Setup
to select
the track or
No
to not select the track.
4.
Repeat step 3 until all tracks on the master have been offered for extraction.
5.
After the last track on the master, the display will read
End Extraction?
Press
Yes/Setup
to
begin burning the selected tracks to the blank disc. Press
No
if you wish to change your
selections; you will run through steps 3-5 again.
6.
After the selected tracks have been burned, the display will read
Next Master?
Press
Yes/Setup
, and the master drive will be ejected to allow you to insert a new master. Close
the tray, and repeat steps 3-5 for the new master.
7.
When you have burned the last track to the disc, answer
No
to the
Next Master?
query. The
disc will then be closed automatically, ejecting when complete.
You cannot put more tracks on the disc than the disc will hold. If the capacity of the disc will be
exceeded by selecting a track, you will not be able to select that track.
Note: If you wish to rearrange the tracks on a single master, you can do so by selecting tracks off
the same master multiple times. You will need to plan the order of the tracks, as you cannot reverse
the orders of tracks during a single master track extraction sequence. For example, you wish to
place all the even numbered tracks in order on the new disc first, followed by the odd numbered
tracks in order. You would need to select the even numbered tracks from the master the first pass,
then burn to the blank disc. When asked for the next master, press
Yes/Setup
but keep the master in
the tray. Select the odd numbered tracks, burn the tracks, then answer
No
at the next master prompt
to close the disc.
Beep
This setting allows you to turn on or off the button beep. Use the Vol Up or Vol Down button to
turn the beep on or off. Press Yes/Setup when done.
System Info
System Info allows you to view the current firmware version installed on the CopyWriter Live.
Press
Yes/Setup
at the System Info menu selection in the Setup menu to review the Firmware
Version and Hardware Version. Press
No
to review the drive make, model, and firmware.
Press
No
to have the option of returning to the Setup menu.
System Update
The CopyWriter Live system can be updated with a CD. If there are changes in the firmware, such
as improved features, bug fixes, etc., the system can be updated using the System Update feature.
