Microboards CopyWriter Live
11
In order for a recorded disc to play back correctly in other players, the disc must be closed. If you
press
Stop
to stop your recoding, then the disc is closed and can be played on other playback
devices. If you press
Pause
while recording a disc, recording will stop, but the disc is not closed.
Playback of this disc is only possible on the CopyWriter Live system.
If you press
Pause
while recording a project and then decide you do not want to record any
additional information to that CD, you can close the disc by selecting Close Disc in the CD Tools
Menu.
Press the
No
button until you reach the drive you wish to close, either the left or right drive. Press
Yes/Setup
to start the process. The message
Closing Disc
will flash until the disc is closed.
After the closing of the disc is complete, press the
Yes/Setup
screen to return back to the CD Tools
menu.
Quick Erase/Full Erase
The CW Live can erase CD-RW media. You have the choice of doing a quick erase or a full erase.
Just place the CD-RW disc in either or both drives and press the
Yes/Setup
button at the left or right
drive. The message
Erasing CD
will flash on the display until the process is complete. Once the
erase is completed, press the
Yes/Setup
button to go back to the CD Tools menu.
