Microaces Scrappee Classic, Assembly Manual

Page: 2 / 29

2
Introduction
Safety
Assembly
Warranty
Thank you for purchasing this Microaces Aero Kit. Designed using innovative ideas,
advanced materials and detailed aircraft illustrations, this aircraft will bring you hours
of building enjoyment and many more exciting flying hours too. Please take your time
to familiarise yourself with these instructions as the aircraft assembles in a very unique
way, following a sequence of steps that should be adhered too to ensure a satisfactory
and flyable model.
It is extremely important to us that you and those around you remain safe while building
and flying Microaces kits. Please take note of the following notices of safety. Microaces
Aero kits contain parts and packaging
unsuitable
for handling by small children.
Please ensure that children under the age of 6 years are prevented from handling the
component parts or packaging of this kit. Although the resulting model is lightweight,
we DON’T recommend that you fly it near or over others where there is a danger of
striking someone. We DO recommend that the maiden flight is performed over long
grass in calm weather away from others.
Read all the instructions carefully before starting assembly.
It is important to use the recommended glues or an equivalent with similar properties.
Foam parts must be glued with a foam safe cement or permanent damage can result to
components. Ensure your knife has a fresh or sharp blade installed to ensure a clean
cut.
Microaces warranties this kit is supplied with all components present and that those
components are free from cosmetic or structural damage to an extent that would
impair the assembly of the kit, alter the aesthetics of the built model and/or the flight
performance of the resulting model. If any parts are missing or damaged please
contact us via email at: support@microaces.com
Cut
Key
Contact Adhesive (Foam Safe)
Part Number
Attention
Score before assembly
Sanding Required
Do Not Glue
Note (Information)
P01
Area of adhesion for glue Refer to Video tutorial for more info